How to Use Laser Level to Hang Pictures

Using a laser level to hang pictures can help ensure they are straight and aligned. Here's a step-by-step guide on how to use a laser level for this task:

1. Choose the right laser level

There are various types of laser levels available, including handheld devices and those that can be mounted on a tripod. Select a laser level that suits your needs.

2. Prepare the area

Clear the wall where you plan to hang the pictures. Remove any existing artwork or decorations and clean the wall surface.

3. Mark the desired height

Determine the desired height at which you want to hang the pictures. Use a measuring tape to measure the height from the floor or a specific reference point. Make a light pencil mark on the wall at this height.

4. Position the laser level

Place the laser level on a stable surface or mount it on a tripod. Ensure that it is set up in a way that allows the laser beam to project straight across the wall.

5. Adjust the laser level

Most laser levels have controls to adjust the position and orientation of the laser beam. Align the laser level so that the laser beam is projected at the desired height marked on the wall. Adjust the level until the laser beam is straight and level.

6. Mark the wall

Once the laser level is properly aligned, it will project a straight line across the wall at the desired height. Use a pencil to lightly mark the wall along the laser line. This mark will serve as a guide for hanging your pictures.

7. Measure and mark picture placements

Measure the height and width of each picture you intend to hang. Transfer these measurements to the wall, starting from the reference line you marked in the previous step. Use a measuring tape and a pencil to make light marks indicating where the top corners or center of each picture should be positioned.

8. Hang the pictures

Using the pencil marks as a guide, hang each picture on the wall. Ensure they are aligned with the marks and use a level to double-check their straightness.

9. Check with the laser level

Once the pictures are hung, you can use the laser level again to verify their alignment. Simply turn on the laser level and place it against the wall, ensuring the laser beam passes over the top edges of the pictures. This will help you make any necessary adjustments to ensure everything is straight and level.

By following these steps, you can effectively use a laser level to hang pictures and achieve a neat and aligned display. Remember to exercise caution when handling the laser level and ensure that the laser beam does not shine directly into your eyes.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.